General Jargon

JargonDescription
ADSL Stands for ‘Asymmetric Digital Subscriber Line’. ADSL transforms the existing twisted copper pairs between the telephone exchange and the telephone socket into a high-speed digital line, allowing Broadband access. ADSL delivers fast download speeds but slow upload speed.
Analogue Line See PSTN
Auto Attendant An automated system designed to guide a caller through the options of a voice menu. Typically set to answer and route incoming calls.
BandwidthThe capacity of a telecom line to carry signals. The necessary bandwidth is the amount of spectrum required to transmit the signal without distortion or loss of information. FCC rules require suppression of the signal outside the band to prevent interference.
BRIStands for ‘Basic Rate Interface’ – see ISDN2e
Broadband A term used to describe fast internet access. Wide bandwidth which can be either ADSL or SDSL. ADSL can suffer from vast bandwidth changes (see also Contention Ratio).
Call HoldA service feature that enables a user to retain an exisiting call, while accepting or originating another call using the same handset or phone device. The held call is tied to the handset that placed the call on hold and, therefore, can only be taken out of hold from the same handset.
Call ParkA service feature that allows a user to place an active call on 'hold' at one telephone handset and then retrieve the call, from any other handset within the same phone network. The call is effectively placed in a 'parking bay' and is allocated a parking bay number, e.g. 101. Users can then pick up another handset on the same network and type in the bay number to retrieve the held call.
Call TransferA service feature that allows a user to place a call on hold whilst, simultaneously, transfering the call to another destination. The detsination can typically be both an internal or external telephone.
Contention Ratio A term used to describe the number of individual broadband customers connecting to a single internet node at the local public exchange. High contentions ratios will cause vast speed differences depending on time of day and number local users on line.
ConvergenceHistorically, Voice & Data networks were kept entirely separate. However in recent years, changes in technology have meant that many businesses can now run both voice and data over the same LAN, thereby causing them to ‘converge’. Cost savings are one benefit of Convergence but far more importantly there are significant productivity and efficiency gains to be achieved. VOIP, IP Telephony, Unified Messaging, Remote Working etc all come under the ‘Convergence’ umbrella.
DDIStands for ‘Direct Dial Inbound’ – allows users to rent individual phone numbers without the need to rent individual lines. DDI’s are mapped onto specific ISDN lines and the PBX is then programmed to direct the incoming DDI call to the specific extension or hunt group as required. Customers can rent a large volume of DDI’s whilst benefiting from renting an optimum number of lines based on required usage.
DECT Stands for ‘Digitally Enhanced Cordless Telecommunications’. A technology used to link cordless mobile handsets to a wired telephone system.
DEL Stands for ‘Direct Exchange Line’ – see PSTN
EthernetA very common method of networking computers in a LAN. An 'Ethernet' describes the physical network that carries data traffic.
Exchange Line See PSTN
Featureline A BT specific service running over the PSTN. Designed for small companies (typically max 3 users), it is a dated product that provides limited basic PBX functionality requiring one dedicated phone line per user. Featureline is not considered to be cost effective for 4 or more users.
Fibre To The Cabinet (FTTC) This is a generic term for any broadband service that uses fibre optic cable, in place of traditional copper wiring, to connect a telephone exchange to the 'green cabinets' in the surrounding roads. This means that copper wires are only used in the last few hundred metres between a green cabinet and a customer's premises. Unlike copper, fibre does not suffer from signal loss over distance and so provides much faster download and upload bandwidth speeds.
Hosted Telephony / Hosted VoIPAn IP based phone system that is "Hosted" in a data centre. Customer sites connect to the hosted phone system via an internet connection** that is generally either ADSL or SDSL but can be a leased line. All the intelligence of the phone system is held within the data centre and the on site equipment is controlled by the central system. Customer communication profiles are configured via a simple web based browser and individual users can control their own phone profile from any internet connection, with ease. Hosted Telephony is particularly beneficial for companies with two or more sites and can be used internationally. All calls made between customer sites are FREE.
** The quality of the internet connection is critically important and it is recommended to keep the voice and data on separate internet connections.
Hunt GroupMultiple phones allocated to a single DDI or extension number, thereby enabling an inbound call to be answered from any phone, within the allocated group of of phones. I.e. accounts or sales depts etc. Inbound calls can be configured to ‘hunt’ from one phone to another (until answered) or to be "broadcast" across all phones in the group, so they all ring at once.
ICTStands for ‘Information and Communication Technology’. Equipment such as computers, the Internet, CD-ROMS and other software.
IP Stands for ‘Internet Protocol’. A standardised method of transporting information across the Internet in packets of data. It is often linked to Transmission Control Protocol, which assembles the packets once they have been delivered to the intended location.
IP Telephony (also see Hosted Telephony)Using Internet Protocol as a method of carrying voice calls. With IP, voice communications (in the form of IP packets) are routed directly from the origin to destination devices.
ISDN (provided in two formats as per below) Stands for ‘Integrated Services Digital Network’. Digital telephony service that gives better call quality, quicker connection times and DDI facilities. ISDN is generally provided to connect to a customers PBX. ISDN can also be used in Radio and was historically used for faster Internet connection before the advent of broadband.
ISDN2e Provided in pairs i.e. 2 channels/lines per ISDN2e. The majority of customers would get a maximum of 4 pairs before moving up to ISDN30e. The e stands for the European standard.
ISDN30e Provided over one large circuit (bearer/pipe) either as copper or in many cases fibre optic. The minimum number of channels/lines one can have is 8 moving up to 30. Larger organisations can rent multiple ISDN30e’s should they require more lines. The e stands for the European standard.
LAN Stands for ‘Local Area Network’ – Data network that connects computers, servers, printers etc together, generally within one physical location.
Leased Line Dedicated private internet access circuit – provides secure, fast and uncontended internet access.
MPLS Stands for ‘Multi Protocol Label Switching’ – A flexible and cost effective way of providing a WAN.
PBX aka PABX Public (Automated) Branch Exchange aka Switchboard aka Phone System.
POTS Stands for ‘Plain Old Telephone Service’ – see PSTN
PRIStands for ‘Primary Rate Interface’ – see ISDN30e
PSTNStands for ‘Public Switched Telephone Network’. This is the standard telephone service provided over basic analogue phone lines.
RouterA device (or, in some cases, software on a computer) that directs IP packets to the next point toward their destination.
SDSL Stands for ‘Symetric Digital Subscriber Line’. The same as ASDL but provides the same speed/bandwidth in both directions. Useful for companies needing to upload high bandwith packets quickly. Common requirement with VOIP networks.
SIPStands for 'Session Initiation Protocol'. It is essentially a communications protocol used to set up and clear down sessions with one or more users over the internet. Can be used in a multitude of scenarios, but most common is in the initiation and termination of Voice over IP calls.
SIP TrunksBasically an internet phone line. Part of the broadband bandwidth is allocated solely for a VoIP call. Each VoIP call requires one SIP trunk but a good quality broadband service can accommodate multiple SIP trunks. SIP trunks are much cheaper to rent than traditional phone lines.
SLAStands for 'Service Level Agreement' - part of a service contract where the level of service is formally defined. In practice, the term SLA is sometimes used to refer to the contracted delivery time (of the service) or performance.
SMTPStands for ‘Simple Mail Transfer Protocol’. The standard Internet protocol for transferring electronic mail from one computer to another.
Unified Messaging Enables you to access voice, fax, and text messages via one single email or telephone account.
VPN Stands for ‘Virtual Private Network’ – A way of creating a private communications network over a public network (mostly the internet) using secure protocols (passwords, authentication methods etc).
VOIP (see Hosted Telephony)Stands for ‘Voice Over Internet Protocol’ - Voice translated into data packets and transmitted across an internet connection or network - just like any other file or email you might send. Upon reaching the other end data is transformed back into its original form and emerges like a regular phone call. (VOIP is critically dependent upon the speed of the packets across the internet and the correct assembly order once they arrive at their destination …for obvious reasons!)
WAN Stands for ‘Wide Area Network’ – Connects multiple LAN’s together, typically via VPN’s over broadband and/or Leased Lines – (The Internet is actually a WAN itself)

PSTN Select Services

JargonDescription
Anonymous Call Rejection Rejects calls where the caller withholds their number.
Answer 1571 Takes messages for you when you are unavailable or your line is engaged.
Bar Use of Call Return Means callers to your number cannot use the Call Return option (i.e. pressing '5' if you are engaged so that it calls them back)
Call Barring Stops certain calls being made from your phone.
Call Diversion Allows you to divert calls to almost any phone - anywhere in the UK, most overseas destinations or a mobile phone!
Call Minder Like Answer 1571, with the additional advantage of remote access and the option of having personalised messages.
Call ReturnA service that will call your phone to let you know when an engaged number becomes free. Normally activated by pressing '5' when you reach an engaged number.
Call Sign Allows you to distinguish between incoming calls on the same line.
Call Waiting Tells you if someone is trying to call when you’re already on the phone.
Caller Display Displays the number calling you
Caller Redirect (CNI) A recorded announcement on a ceased line advising the caller of the new number to dial. This is a chargeable service.
Choose to refuse Enables you to bar the telephone number of the last answered incoming call.
Presentation Number Enables the option of "masking" the main outbound number of a telephone line with a different number. This option is seful for call centres or companies that are located in obscure locations and dont want end users to know their physical location or if they want to present a non-geographic number to the customers they are calling. For example, a company has a simple 0207 number but they want an 0845 number to be displayed to every end user that they call.
Pulse Metering Sends 50Hz pulses to customers’ lines to indicate units of charge.
Reminder Call An alarm call that you are able to set up by programming your own phone.
Remote Call Forwarding (RCF) A method for forwarding calls made to a ceased line to a new number, without the caller being aware that the call has been forwarded. There is normally a set up cost and monthly charge for this service. In addition the owner of the line has to pay the cost of the forwarded part of the call, as well as the exchange line rental for the ceased line (this is because the number of the ceased line cannot be reallocated to another user whilst RCF is in effect)
Ring Back See 'Call Return'
Smart Divert Call divert with remote access
Three Way Calling Allows you talk to two people at the same time - even if one of them is abroad!

ISDN Select Services

JargonDescription
Call Barring Stops certain calls being made from your phone.
Call Deflection Enables incoming calls to be identified and then forwarded to another destination before answering the call. Alternatively, incoming calls can be automatically forwarded to selected destinations dependent on their calling line identity.
Call Forwarding Automatically transfers incoming calls to a different location, e.g. if moved to a different exchange area. Can either be admin provided or customer controlled.
Calling Line Identity Restriction (CLIR) This prevents your directory number from being released at any time. It is useful if you don't want people to call you back, i.e. if you are running an outbound telemarketing campaign.
Calling Line Identity Presentation (CLIP) Lets you see the number of the person calling before you pick up the phone, enabling you to greet the caller in an appropriate manner.
Connected Line Identity Presentation (COLP) Allows you to see the number of the line that you have been connected to.
Connected Line Identity Restriction (COLR) Restricts the access of incoming callers to your identity
Presentation Number Enables the option of "masking" the main outbound number of a telephone line with a different number. This option is useful for call centres or companies that are located in obscure locations and dont want end users to know their physical location or if they want to present a non-geographic number to the customers they are calling. For example, a company has a simple 0207 number but they want an 0845 number to be displayed to every end user that they call.
Site Assurance Only available on ISDN30 lines. This service allows you to pre-prgramme a number that you would like your ISDN30 lines to divert to in the event of a line failure or other emergency. The divert can be activated within one hour by calling a specific phone number and quoting a password which you are given at the time of setting up the service. There is a monthly charge for this facility, whether or not you use it. Charges will also be incurred for the diverted part of the call when the diversion is activated.
Sub Addressing (20 Octet) This service allows calling parties to send up to 20 alphanumeric characters (except #) with the digits of the number they are dialing. Different combinations of characters can then be allocated to each device connected to a called ISDN 30e line. The characters sent would depend which piece of equipment is accessed, i.e. the phone will ring, access will be gained to PC, etc. Note: Terminal equipment must have the capability to send and/or receive Sub Addresses to use this service
Service Maintenance LevelsService Maintenance Levels apply to phone lines, and determine the level of response you will receive in the event of a fault on the line. These were previously known as Care Levels.
Service Maintenance Level 1 (previously Standard Care) Fault resolved by the end of the next working day + 1, Monday to Friday, excluding Public and Bank Holidays. This service is included in line rental charges. Note that this service only applies to residential customers.
Service Maintenance Level 2 (previously Standard or Prompt Care) Fault resolved by the end of the next working day, Monday to Saturday, excluding Public and Bank Holidays. This service is included in line rental charges.
Service Maintenance Level 3 (previously Total Care) Fault resolved by midnight of the same day if reported by 13.00, otherwise resolved the following day. Operates 24 hours a day 365 days a year. This is a chargeable service.
Service Maintenance Level 4 (new service) Fault resolved within 6 hours, operates 24 hours a day 365 days a year. This is a chargeable service.
Note that it is possible to pay to upgrade to a higher Service Maintenance Level at the time of a fault, although this is normally very expensive.

Phone Book Entries

JargonDescription
Ordinary (O) Directory entry held in the BT Phone Book and from Directory Enquiries (118 services)
Ex Directory - No Calls Offered (XDNC) Not in the BT Phone Book or held on Directory Enquiries
Directory Enquiries Only (DQR) Not in the BT Phone Book, but is held on Directory Enquiries (118 services)
Ex Directory - Calls Offered (XDCO) Not in the BT Phone Book, and not disclosed by Directory Enquiries. The operator will offer to call the customer for persistent enquiries. Please note that this is a chargeable service
No Directory Entry Required (NQR) No directory entry is made, this option is usually only available for lines connected to alarm systems, modems etc.